Skupina materiálů s řízenou mikrostrukturou „MCM“

  1. P. Li, J. Dai, Y. Li, D. Alexander, J. Čapek, J. Geis-Gerstorfer, G. Wan, J. Han, Z. Yu, A. Li
    Zinc based biodegradable metals for bone repair and regeneration: Bioactivity and molecular mechanisms
    Materials Today Bio 25 (2024) 100932(1)-100932(22).
  2. M. Roudnická, Z. Kačenka, D. Dvorský, J. Drahokoupil, D. Vojtěch
    Hydrogen Embrittlement of Ti-Al6-V4 Alloy Manufactured by Laser Powder Bed Fusion Induced by Electrochemical Charging
    Metals 14 (2024) 251-.
  3. P. Lejček, A. Školáková
    Grain boundary configurational entropy: a challenge
    Journal of Materials Science 58 (2023) 10043-10057.
  4. H. Shang, E. Elmukashfi, J. Čapek, P. Lejček, K.R. Hallam, A.C.F. Cocks, C. Hardie, T.L. Martin, P.E.J Flewitt
    A novel approach for evaluating creep damage and cavitation in copper bicrystals subject to constant load
    Materialia 30 (2023) 101837 (1)-101837 (5).
  5. L. Kadeřávek, P. Šittner, O. Molnárová, L. Klimša, L. Heller
    Localized Plastic Deformation of Superelastic NiTi Wires in Tension
    Shape Memory and Superelasticity 9:261 (2023) 1-19.
  6. O. Molnárová, M. Klinger, J. Duchoň, H. Seiner, P. Šittner
    Plastic deformation of B19’ monoclinic martensite in NiTi shape memory alloys: HRTEM analysis of interfaces in martensite variant microstructures
    Acta Materialia 258 (2023) 119242 (1)-119242 (22).
  7. D. Dvorský, J. Kubásek, D. Nečas, M. Čavojský, J. Drahokoupil, D. Vojtěch
    The effect of treatment of powder precursor on the properties of compacted Mg-4Y-3Re alloy
    Journal of Engineering Materials and Technology 145 (2023) 045001(1)-045001(8).
  8. S. M. Samal, J. Tomáštík, R. Čtvrtlík, L. Václavek, O. Molnárová, P. Šittner
    Surface Deformation Recovery by Thermal Annealing of Thermal Plasma Sprayed Shape Memory NiTi Alloys
    Coatings 13 (2) (2023) 433 (1)-433 (18).
  9. M. Balog, M. Marques de Castro, J. Čapek, P. Švec Jr, M. Takáčová, L. Csáderová, E. Sedláčková, E. Švastová, A. Školáková, D. Dvorský, J. Pinc, V. Hybášek, J. Kubásek, P. Krížik, J. Skiba, O. Bajana, A. M. H. Ibrahim
    Suppression of mechanical instability in bioabsorbable ultrafine-grained Zn through in-situ stabilization by ZnO nanodispersoids
    Journal of Materials Research and Technology 25 (2023) 4510-4527.
  10. D Nečas, Ilona Voňavková, J. Pinc, D. Dvorský, J Kubásek
    Nanograined Zinc Alloys with Improved Mechanical Properties Prepared by Powder Metallurgy
    Microscopy and Microanalysis 29 (2023) 169-170.
  11. O. Molnárová, A. Školáková, S. Habr, J. Čapek, Z. Weiss, P. Málek, P. Lejček
    Complex severe plastic deformation of aluminum single crystal
    Procedia Structural Integrity 43 (2023) 166-171.
  12. M. Karlík, F. Průša, P. Kratochvíl, H. Thürlová, A. Strakosova, J. Čech, J. Čapek, M. Vronka, M. Cabibbo, O. Ekrt
    Microstructure and mechanical properties of spark plasma sintered CoCrFeNiNbX high-entropy alloys with Si addition
    Materials 16 (2023) 2491-.
  13. J. Pinc, A. Školáková, V. Hybášek, Š. Msallamová, P. Veřtát, P. Ashcheulov, M. Vondráček, J. Duchoň, I. McCarroll, M. Hývl, S. Banerjee, J. Drahokoupil, J. Kubásek, D. Vojtěch, J. Čapek
    A detailed mechanism of degradation behaviour of biodegradable as-ECAPed Zn-0.8Mg-0.2Sr with emphasis on localized corrosion attack
    Bioactive Materials 27 (2023) 447(1)-460(14).
  14. P. Šittner, O. Molnárová, X. Bian, L. Heller, H. Seiner
    Tensile Deformation of B19′ Martensite in Nanocrystalline NiTi Wires
    Shape Memory and Superelasticity 9 (2023) 11-34.
  15. P. Salvetr, A. Školáková, J. Kotous, J. Drahokpupil, D. Melzer, Z. Jansa, Č. Donik, A. Gokham, Z. Nový
    Effect of Double-Step and Strain-Assisted Tempering on Properties of Medium-Carbon Steel
    Materials 16 (2023) 1-14.
  16. O. Molnárová, S. Habr, J. Čapek, O. Ekrt, P. Málek, L. Bajtošová, A. Školáková, P. Lejček
    The Role of Mandrel Rotation during CSET Processing Demonstrated on a 3003 Aluminium Alloy
    Metals 12 (2022) 1-13.
  17. A. Uhnáková, A. Machová, M. Janovská, M. Ševčík, J. Štefan, P. Hora, J. Čapek, P. Lejček
    Fracture toughness of Fe–Si single crystals in mode I: Effect of loading rate on an edge crack (–110)[110] at macroscopic and atomistic level
    Journal of Applied Physics 132 (2022) 065107 (1)-065107 (13).
  18. M. Černý, P. Šesták, M. Všianská, P. Lejček
    On Agreement of Experimental Data and Calculated Results in Grain Boundary Segregation
    Metals 12 (2022) 1389 (1)-1389 (12).
  19. David Nečas, Jiří Kubásek, J. Pinc, Ivo Marek, Črtomir Donik, Irena Paulin, Dalibor Vojtěch
    Ultrafine-Grained Zn–Mg–Sr Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering
    Materials 15 (2022) 8379-.
  20. D. Nečas, I. Marek, J. Pinc, D. Vojtěch, J. Kubásek
    Advanced zinc–Magnesium alloys prepared by mechanical alloying and spark plasma sintering
    Materials 15 (2022) 5272-.
  21. M. Roudnická, J. Kubasek, J. Bigas, D. Vojtech
    Stabilizing the microstructure of additively manufactured low-C Co-28Cr-6Mo alloy
    Solid State Phenomena 334 (2022) 13-18.
  22. A. Školáková, J. Pinc, P. Novák
    The preferential formation of Ni2Al3, Fe2Al5, and Ti2Al5 phases in aluminide systems
    Materials Chemistry and Physics 280 (2022) 125859(1)-125859(5).
  23. J. Pinc, J. Kubásek, J. Drahokoupil, J. Čapek, D. Vojtěch, A. Školáková
    Microstructural and Mechanical Characterization of Newly Developed Zn-Mg-CaO Composite
    Materials 15 (2022) 8703-.
  24. P. Salvetr, A. Školáková, D. Melzer, M. Brázda, J. Duchoň, J. Drahokoupil, P. Svora, Š. Msallamová, P. Novák
    Characterization of super duplex stainless steel SAF2507 deposited by directed energy deposition
    Materials Science and Engineering A 857 (2022) 144084-.
  25. J. Kubásek, J. Pinc, K. Hosová, M. Straková, O. Molnárová, J. Duchoň, D. Nečas, M. Čavojský, M. Knapek, M. Godec, I. Paulin, D. Vojtěch, J. Čapek
    The evolution of microstructure and mechanical properties of Zn-0.8Mg-0.2Sr alloy prepared by casting and extrusion
    Journal of Alloys and Compounds 906 (2022) 164308(1)-164308(14).
  26. F. Khodabakhshi, O. Ekrt, M. Abdi, A.P. Gerlich, M. Mottaghi, R. Ebrahimi, M. Nosko, G. Wilde
    Hydrogen storage behavior of Mg/Ni layered nanostructured composite materials produced by accumulative fold-forging
    International Journal of Hydrogen Energy 47 (2022) 1048-1062.
  27. K. Hosová, J. Pinc, A. Školáková, V. Bartůněk, P. Veřtát, T. Školáková, F. Průša, D. Vojtěch, J. Čapek
    Influence of Ceramic Particles Character on Resulted Properties of Zinc-Hydroxyapatite/Monetite Composites
    Metals 11 (2021) 499
  28. P. Lejček, S. Hofmann
    Entropy-Driven Grain Boundary Segregation: Prediction of the Phenomenon
    Metals 11 (2021) 1331 (1)-1331 (10).
  29. O. Molnárová, O. Tyc, L. Heller, H. Seiner, P. Šittner
    Evolution of martensitic microstructures in nanocrystalline NiTi wires deformed in tension
    Acta Materialia 218 (2021) 117166 (1)-117166 (29).
  30. O. Tyc, O. Molnárová, P. Šittner
    Effect of microstructure on fatigue of superelastic NiTi wires
    International Journal of Fatigue 152 (2021) 106400 (1)-106400 (11).
  31. A. Strakosova, M. Roudnická, O. Ekrt, A. Michalcová, D. Vojtěch
    Hydrogen Embrittlement of the Additively Manufactured High-Strength X3NiCoMoTi 18-9-5 Maraging Steel
    Materials 14 (2021) 5073(1)-5073(9).
  32. Z. Kacenka, M. Roudnická, O. Ekrt, D. Vojtech
    High susceptibility of 3D-printed Ti-6Al-4V alloy to hydrogen trapping and embrittlement
    Materials Letters 301 (2021) 130334(1)-130334(4).
  33. M. Roudnická, J. Bigas, O. Molnárová, D. Palousek, D. Vojtech
    Different response of cast and 3D-printed Co-Cr-Mo alloy to heat treatment: A thorough microstructure characterization
    Metals 11 (2021) 687(1)-687(21).
  34. M. Roudnická, J. Kubasek, L. Pantelejev, O. Molnárová, J. Bigas, J. Drahokoupil, D. Palousek, D. Vojtech
    Heat treatment of laser powder-bed-fused Co-28Cr-6Mo alloy to remove its microstructural instability by massive hcp→fcc transformation
    Additive Manufacturing 47 (2021) 102265(1)-102265(14).
  35. M. Roudnická, O. Molnárová, J. Drahokoupil, J. Kubasek, J. Bigas, V. Sreibr, D. Palousek, D. Vojtech
    Microstructural instability of L-PBF Co28Cr6Mo alloy at elevated temperatures
    Additive Manufacturing 44 (2021) 102025(1)-102025(16).
  36. O. Molnárová, S. Habr, E. de Prado, J. Čapek, O. Ekrt, G. Németh, P. Málek, P. Lejček
    Microstructural Evolution of a 3003 Based Aluminium Alloy during the CSET Process
    Materials 14 (2021) 5770 (1)-5770 (17).
  37. K. Klíma, D. Ulmann, M. Bartoš, M. Španko, J. Dušková, R. Vrbová, J. Pinc, J. Kubásek, T. Ulmannová, R. Foltán, E. Brizman, M. Drahoš, M. Beňo, J. Čapek
    Zn–0.8Mg–0.2Sr (wt.%) absorbable screws—an in-vivo biocompatibility and degradation pilot study on a rabbit model
    Materials 14 (2021) 3271(1)-3271(21).
  38. D. Musiienko, F. Nilsén, A. Armstrong, M. Rameš, P. Veřtát, R.H. Colman, J. Čapek, P. Müllner, O. Heczko, L. Straka
    Effect of crystal quality on twinning stress in Ni–Mn–Ga magnetic shape memory alloys
    Journal of Materials Research and Technology 14 (2021) 1934-1944.
  39. J. Čapek, L. Kadeřávek, J. Pinc, J. Kopeček, L. Klimša
    Influence of the microstructure of the initial material on the zn wires prepared by direct extrusion with a huge extrusion ratio
    Metals 11 (2021) 787(1)-787(14).
  40. J. Čapek, J. Kubásek, J. Pinc, J. Fojt, S. Krajewski, F. Rupp, P. Li
    Microstructural, mechanical, in vitro corrosion and biological characterization of an extruded Zn-0.8Mg-0.2Sr (wt%) as an absorbable material
    Materials Science and Engineering: C Materials for Biological Applications 122 (2021) 111924(1)-111924(13).
  41. J. Čapek
    Special Issue: “Processing and Treatment of Hexagonal Metals”
    Metals 11 (2021) 1753(1)-1753(3).
  42. S. M. Samal, O. Tyc, J. Cizek, J. Klecka, F. Lukáč, O. Molnárová, E. de Prado, Z. Weiss, J. Kopeček, L. Heller, P. Šittner, T. Chráska
    Fabrication of Thermal Plasma Sprayed NiTi Coatings Possessing Functional Properties
    Coatings 11 (2021) 610 (1)-610 (16).
  43. A. Školáková, J. Körberová, P. Kratochvíl, P. Salvetr, D. Deduytsche, P. Novák
    A comprehensive description of reactions between nickel and aluminum powders during reactive sintering
    Materials Chemistry and Physics 271 (2021) 124941(1)-124941(32).
  44. K. Klíma, D. Ulmann, M. Bartoš, M. Španko, J. Dušková, R. Vrbová, J. Pinc, J. Kubásek, M. Vlk, T. Ulmannová, R. Foltán, E. Brizman, M. Drahoš, M. Beňo, V. Machoň, J. Čapek
    A Complex Evaluation of the In-Vivo Biocompatibility and Degradation of an Extruded ZnMgSr Absorbable Alloy Implanted into Rabbit Bones for 360 Days
    International Journal of Molecular Sciences 22 (2021) 13444(1)-13444(24).
  45. Pavel Pal-Val, Olena Vatazhuk, Andriy Ostapovets, Lubomír Král, J. Pinc
    Thermoactivated Dislocation Motion in Rolled and Extruded Magnesium: Data of the Low-Temperature Acoustic Experiment
    Metals 11 (2021) 1647-1660.
  46. J. Pinc, A. Školáková, P. Veřtát, J. Duchoň, J. Kubásek, P. Lejček, D. Vojtěch, J. Čapek
    Microstructure evolution and mechanical performance of ternary Zn-0.8 Mg-0.2 Sr (wt.%) alloy processed by equal-channel angular pressing
    Materials Science and Engineering A 824 (2021) 141809-141823.
  47. V. Hybasek, J. Kubasek, J. Čapek, D. Alferi, J. Pinc, J. Jiru, J. Fojt
    Influence of model environment complexity on corrosion mechanism of biodegradable zinc alloys
    Corrosion Science 187 (2021) 109520-109532.
  48. J. Pinc, M. Španko, L. Lacina, J. Kubásek, P. Ashcheulov, P. Veřtát, A. Školáková, O. Kvítek, D. Vojtěch, J. Čapek
    Influence of the pre-exposure of a Zn-0.8Mg-0.2Sr absorbable alloy in bovine serum albumin containing media on its surface changes and their impact on the cytocompatibility of the material
    Materials Today Communications 28 (2021) 102556-102569.
  49. S. M. Samal, O. Molnárová, F. Průša, J. Kopeček, L. Heller, P. Šittner, M. Škodová, L. Abate, I. Blanco
    Net-Shape NiTi Shape Memory Alloy by Spark Plasma Sintering Method
    Applied Sciences 11 (2021) 1802(1)-1802(16).
  50. M. Roudnická, J. Bigas, V. Sreibr, D. Palousek, D. Vojtech
    Direct comparison between Co-28Cr-6Mo alloy prepared by Selective Laser Melting and traditional investment casting
    IOP Conference Series: Materials Science and Engineering 1178 (2021) 12046(1)-12046(6).