Skupina funkčních materiálů a kompozitů „FMC“

  1. S. M. Samal
    A Numerical Framework for the Spin Coating of PMMA Solutions on NiTi: A Parametric Study and Preliminary Design Guide
    Coatings 15 (2025) 1271 (1)-1271 (15).
  2. K. L. Rao, A. Bhardwaj, Ch. Sh. Sai Satwika, J. Kopeček, G.M. Karthik, A. K. Gupta
    Influence of constrained groove pressing and post-annealing on the mechanical, microstructural, and strain hardening behaviour of Nimonic 263 alloy
    Materials Science and Engineering A 922 (2025) 147658-1-147658-15.
  3. S. M. Samal, J. Tomáštík, L. Václavek, M. Chandra, J. Kopeček, I. Stachiv, P. Šittner
    Recovery of deformation surface of superelastic and shape memory NiTi alloy
    Applied Surface Science 25 (2025) 100684-1-100684-20.
  4. S. M. Samal, D. Vokoun, I. Stachiv, P. Šittner
    Simulation of thermal stress predictions for NiTi coating on a stainless-steel substrate using thermal plasma spraying
    Ceramics International 23 (2025) 1-9.
  5. O. Molnárová, E. Iaparova, L. Heller, P. Šittner
    TEM analysis of permanent lattice defects created by forward and reverse martensitic transformations proceeding under stress in nanocrystalline NiTi wire
    Acta Materialia 297 (2025) 121346 (1)-121346 (33).
  6. D. Vokoun, O. Tyc, S. M. Samal, I. Stachiv, Y. Yu, Ch. Kei
    Fatigue Resistance Improvement in Cold-Drawn NiTi Wires Treated with ALD: A Preliminary Investigation
    Applied Sciences 15 (2025) 1-13.
  7. H. Ma, K. Liu, P. Šittner, O. Molnárová, E. Alarcon, H. Lu, W. Cai, L. Heller, Ch. Yang
    Shape Memory and Thermal Actuation Behavior of Laser Powder Bed Fusion‑Fabricated NiTi‑20Hf High‑Temperature Shape Memory Alloys
    Shape Memory and Superelasticity xxx (2025) 1-11.
  8. H. Ma, O. Molnárová, P. Šittner, H. LU, W. Cai, E. Alarcón, J. Kopeček, L. Heller, L. Kang, C. Yang
    NiTiHf high-temperature shape memory alloy fabricated via laser powder bed fusion showing fully recoverable actuation under tensile stress
    Acta Materialia 301 (2025) 121562 (1)-121562 (40).
  9. P. Sedlák, M. Frost, M. Ševčík, L. Kadeřávek, H. Seiner
    In situ Observation of Elastic Instability of Stress-Induced B19 Martensite in Thin NiTi Wires
    Shape Memory and Superelasticity 11 (2025) 513-522.
  10. L. Bodnárová, M. Janovská, M. Ševčík, M. Frost, L. Kadeřávek, J. Kopeček, H. Seiner, P. Sedlák
    Elastic Constants of Single-Crystalline NiTi Studied by Resonant Ultrasound Spectroscopy
    Shape Memory and Superelasticity 11 (2025) 230-238.
  11. A. Lytvynenko, S. Baluchová, J. Kopeček, S. Sedláková, J. Lorinčík, I. Elantyev, A. Taylor, K. Schwarzová-Pecková
    Homoepitaxial {100} single crystal boron-doped diamond: nanostructuring and its impact on electrochemical performance
    Surfaces and Interfaces 65 (2025) 106499(1)-106499(11).
  12. P. Šittner, L. Heller, E. Iaparova, L. Kadeřávek, O. Molnárová, O. Tyc
    Generation of Plastic Strains by the Martensitic Transformations under Stress via Dislocation Slip in Martensite as the Origin of Functional Fatigue
    Shap. Mem. Superelasticity 0 (2025) 1 - 29
  13. M. Uchimali, P. Šittner
    A Brief Review on Discrete Modelling of Martensitic Phase Transformations
    Shape Memory and Superelasticity 10 (2024) 2-15.
  14. O. Tyc, E. Iaparova, O. Molnárová, L. Heller, P. Šittner
    Stress-induced martensitic transformation in NiTi at elevated temperatures: Martensite variant microstructures, recoverable strains and plastic strains
    Acta Materialia 279 (2024) 120287 (1)-120287 (20).
  15. H.W. Ma, H.Z. Lu, L.M. Kang, W.S. Cai, Y.C. Chen, P. Šittner, C. Yang
    Enhanced thermal cycle stability and shape memory effect in NiTiHf shape memory alloys fabricated by laser powder bed fusion
    Additive Manufacturing 92 (2024) 104375 (1)-104375 (14).
  16. M. H. Kuo, N. Neykova, I. Stachiv
    Overview of the Recent Findings in the Perovskite-Type Structures Used for Solar Cells and Hydrogen Storage
    Energies 17 (2024) 4755(1)-4755(23).
  17. O. Tyc, X. Bian, O. Molnárová, L. Kadeřávek, L. Heller, P. Šittner
    Martensitic transformation induced by cooling NiTi wire under various tensile stresses: Martensite variant microstructures, textures, recoverable strains and plastic strains
    Applied Materials Today 41 (2024) 102448 (1)-102448 (25).
  18. S. M. Samal, J. Zeman, S. Habr, O. pacherová, J. Kopeček, P. Šittner
    Preparation and Characterization of Multilayer NiTi Coatings by a Thermal Plasma Process
    Materials 17 (2024) 1-17.
  19. S. M. Samal, J. Zeman, J. Kopeček, P. Šittner
    Thermal plasma spraying of NiTi powder for thick coating of shape memory alloy
    Journal of Alloys and Compounds 984 (2024) 173962 (1)- 173962 (15).
  20. S. Hosseini, P. Novák, M. Alishahi, Z. Kačenka, P. Šittner
    Trade-Off Between Wear/Corrosion Performance and Mechanical Properties in D-AlNiCo Poly-Quasicrystals Through CNT Addition to the Microstructure
    Metals 14 (2024) 1-15.
  21. S. Cai, J.E. Shaffer, T. Shi, J. Gao, L. Kadeřávek
    Effect of Cu Alloying and Heat Treatment Parameters on NiTi Alloy Phase Stability and Constitutive Behavior
    Shape Memory and Superelasticity 10 (2024) 460-472.
  22. D. Vokoun, Yuan-Hung Lo, O. Heczko, S. M. Samal, Chen-Ti Hu
    Microstructure and Magnetic Properties of Fe67.6-Pd32-In0.4 (at.%) Shape Memory Melt-Spun Ribbons
    Materials 17 (2024) 1674(1)-1674(13).
  23. L. Heller, P. Šittner
    On the habit planes between elastically distorted austenite and martensite in NiTi
    Acta Materialia 269 (2024) 119828 (1)-119828 (22).
  24. O. Molnárová, O. Tyc, M. Klinger, P. Šittner
    Reconstruction of martensite variant microstructures in grains of deformed NiTi shape memory alloy by TEM
    Materials Characterization 214 (2024) 114084 (1)-114084 (14).
  25. P. Šittner, E. Iaparova, O. Molnárová, O. Tyc, X. Bian, L. Kadeřávek, L. Heller
    Recoverable and plastic strains generated by forward and reverse martensitic transformations under external stress in NiTi SMA wires
    Materials & Design 244 (2024) 113188 (1)-113188 (19).
  26. W. Li, Y. Chen
    Coupled higher-order layerwise mechanics and finite element formulations for laminated composite beams with active SMA layers
    European Journal of Mechanics - A: Solids 107 (2024) 105380 (1)-105380 (13).
  27. A. Bhardwaj, N. Gohil, A. Sharma, A. K. Gupta, S.S. S. Kumar
    Microtexture and mechanical properties evolution of Ti6Al4V with varying pressing speeds of constrained groove pressing
    Materials Today Communications 38 (2024) 108340 (1)-108340 (13).
  28. E. Iaparova, L. Heller, O. Tyc, P. Šittner
    Thermally induced reorientation and plastic deformation of B19’ monoclinic martensite in nanocrystalline NiTi wires
    Acta Materialia 242 (2023) 118477(1)-118477(19).
  29. D. Vokoun, S. M. Samal, I. Stachiv
    Impact of Initial Cyclic Loading on Mechanical Properties and Performance of Nafion
    Sensors 23 (2023) 1488(1)-1488(8).
  30. K. Tesař, M. Koller, D. Vokoun, O. Tyc, J. Čech, P. Sedlák
    Texture, elastic anisotropy and thermal stability of commercially pure titanium prepared by room temperature ECAP
    Materials & Design 226 (2023) 111678(1)-111678(13).
  31. P. Šittner, O. Molnárová, X. Bian, L. Heller, H. Seiner
    Tensile Deformation of B19′ Martensite in Nanocrystalline NiTi Wires
    Shape Memory and Superelasticity 9 (2023) 11-34.
  32. H. Seiner, P. Sedlák, M. Frost, P. Šittner
    Kwinking as the plastic forming mechanism of B19 NiTi martensite
    International Journal of Plasticity 168 (2023) 103697 (1)-103697 (29).
  33. Y. Chen, M. Klinger, J. Duchoň, P. Šittner
    Modulated martensite in NiTi shape memory alloy exposed to high stress at high temperatures
    Acta Materialia 258 (2023) 119250 (1)-119250 (19).
  34. L. Kadeřávek, P. Šittner, O. Molnárová, L. Klimša, L. Heller
    Localized Plastic Deformation of Superelastic NiTi Wires in Tension
    Shape Memory and Superelasticity 9:261 (2023) 1-19.
  35. P. Šittner, E. Iaparova, L. Kadeřávek, Y. Chen, O. Tyc
    Tensile deformation of NiTi shape memory alloy thermally loaded under applied stress
    Materials & Design 226 (2023) 111638 (1)-111638 (22).
  36. O. Molnárová, M. Klinger, J. Duchoň, H. Seiner, P. Šittner
    Plastic deformation of B19’ monoclinic martensite in NiTi shape memory alloys: HRTEM analysis of interfaces in martensite variant microstructures
    Acta Materialia 258 (2023) 119242 (1)-119242 (22).
  37. W. Li, I. Stachiv
    Computational Modeling and Parametric Analysis of SMA Hybrid Composite Plates under Thermal Environment
    Sensors 23 (2023) 1344(1)- 1344(17).
  38. S. M. Samal, O. Kosjakova
    Surface feature of PMMA films on NiTi alloy substrate by the spin coating method
    Ceramics International 49 (2023) 24370-24738.
  39. S. M. Samal, J. Tomáštík, R. Čtvrtlík, L. Václavek, O. Molnárová, P. Šittner
    Surface Deformation Recovery by Thermal Annealing of Thermal Plasma Sprayed Shape Memory NiTi Alloys
    Coatings 13 (2) (2023) 433 (1)-433 (18).
  40. S. M. Samal, B Svomova, M. Spasovová, O. Tyc, D. Vokoun, I. Stachiv
    Physical, Thermal, and Mechanical Characterization of PMMA Foils Fabricated by Solution Casting
    Applied Sciences 1016 (2023) 1-8.
  41. S. M. Samal, M. Sulovský, J. Kopeček, P. Šittner
    Deposition and characterization of plasma sprayed NiTi powder on stainless steel and graphite substrate
    Materials Chemistry and Physics 307 (2023) 128146-1-128146-11.
  42. S. M. Samal, J. Zeman, J. Kopeček, P. Šittner
    Phase Transformation and Mechanical Properties of a NiTi Coating Applied to Graphite Substrate via a Plasma Spraying Process
    Coatings 13 (2023) 1174-1-1174-14.
  43. S. M. Samal, J. Zeman, S. Habr, O. Pacherová, M. Chandra, J. Kopeček, P. Šittner
    Evaluation of Microstructure–Porosity–Hardness of Thermal Plasma-Sprayed NiTi Coating Layers
    Journal of Manufacturing Processes 7 (2023) 198-1-198-16.
  44. I. Stachiv, CH-Y. Kuo, W. Li
    Protein adsorption by nanomechanical mass spectrometry: Beyond the real-time molecular weighting
    Frontiers in Molecular Biosciences 9 (2023) 1-8.
  45. Chih-Yun Kuo, Hsin-Yi Tseng, I. Stachiv, Chon-Haw Tsai, Yi-Chun Lai, Tomas Nikolai
    Combining Neuropsychological Assessment with Neuroimaging to Distinguish Early-Stage Alzheimer’s Disease from Frontotemporal Lobar Degeneration in Non-Western Tonal Native Language-Speaking Individuals Living in Taiwan: A Case Series
    Journal of Clinical Medicine 12 (2023) 1-14.
  46. X. Bian, L. Heller, L. Kadeřávek, P. Šittner
    In-situ synchrotron X-ray diffraction texture analysis of tensile deformation of nanocrystalline NiTi wire in martensite state
    Applied Materials Today 26 (2022) 101378(1)-101378(29).
  47. S. M. Samal, Olga Kosjakova, D. Vokoun, I. Stachiv
    Shape Memory Behaviour of PMMA-Coated NiTi Alloy under Thermal Cycle
    Polymers 14 (2022) 2932-.
  48. X. Bian, L. Heller, O. Tyc, L. Kadeřávek, P. Šittner
    In-situ synchrotron x-ray diffraction texture analysis of tensile deformation of nanocrystalline superelastic NiTi wire at various temperatures
    Materials Science and Engineering A 853 (2022) 143725(1)-143725(21).
  49. Q. He, G. Yin, D. Vokoun, Q. Shen, J. Lu, X. Liu, X. Xu, M. Yu, Z. Dai
    Review on Improvement, Modeling, and Application of Ionic Polymer Metal Composite Artificial Muscle
    Journal of Bionic Engineering 19 (2022) 279-298.
  50. D. Vokoun, S. M. Samal, I. Stachiv
    Magnetic Force Microscopy in Physics and Biomedical Applications
    Magnetochemistry 8 (2022) 42(1)-42(14).