1. S. M. Samal, Ignazio Blanco
    An Overview of Thermal Plasma Arc Systems for Treatment of Various Wastes in Recovery of Metals
    Materials 15 (2022) 683-.
  2. S. M. Samal
    Anisotropic Heat Transfer in Plane of Carbon Fabrics Reinforced Geopolymer Composite
    Applied Sciences 12(13) (2022) 6624 (1)-6624 (13).
  3. X. Bian, L. Heller, L. Kadeřávek, P. Šittner
    In-situ synchrotron X-ray diffraction texture analysis of tensile deformation of nanocrystalline NiTi wire in martensite state
    Applied Materials Today 26 (2022) 101378(1)-101378(29).
  4. V. Mortet, A. Taylor, M. Davydova, J.Jiránek, L. Fekete, L. Klimša, D. Šimek, N. Lambert, S. Sedláková, J. Kopeček, P.Hazdra
    Effect of substrate crystalline orientation on boron-doped homoepitaxial diamond growth
    Diamond and Related Materials 122 (2022) 108887(1)-108887(6).
  5. P. Hazdra, A. Laposa, Z. Šobáň, J. Voves, N. Lambert, M. Davydova, V. Povolný, A. Taylor, V. Mortet
    Low-resistance ohmic contacts on boron-doped {113} oriented homoepitaxial diamond layers
    Diamond and Related Materials 121 (2022) 108797(1)-108797(7).
  6. A. Taylor, S. Baluchová, L. Fekete, L. Klimša, J. Kopeček, D. Šimek, M. Vondráček, L. Míka, J. Fischer, K. Schwarzová-Pecková, V. Mortet
    Growth and comparison of high-quality MW PECVD grown B doped diamond layers on {118}, {115} and {113} single crystal diamond substrates
    Diamond and Related Materials 123 (2022) 108815(1)-108815(8).
  7. V. Mortet, A. Taylor, M. Davydova, M. Lamač, N. Lambert, I.Elantyev, J.Lorinčík, D.Troadec, M. Vronka, Š. Potocký
    Effect of pulsed methane gas flow on the incorporation of phosphorous in diamond
    Diamond and Related Materials 124 (2022) 108928(1)-108928(6).
  8. O. Molnárová, S. Habr, J. Čapek, O. Ekrt, P. Málek, L. Bajtošová, A. Školáková, P. Lejček
    The Role of Mandrel Rotation during CSET Processing Demonstrated on a 3003 Aluminium Alloy
    Metals 12 (2022) 1-13.
  9. I. A. Vlčková Kühne, A. Ozarowski, A. Sultan, K. Esien, A. B. Carter, P. Wix, A. Casey, M. Heerah-Booluck, T. D. Keene, H. Müller-Bunz, S. Felton, S. Hill, G. G. Morgan
    Homochiral Mn3+ Spin-Crossover Complexes: A Structural and Spectroscopic Study
    Inorganic Chemistry 61 (2022) 3458-3471.
  10. N. Lambert, Z. Weiss, L. Klimša, J. Kopeček, Z. Gedeonová, P. Hubík, V. Mortet
    Highly phosphorus-doped polycrystalline diamond growth and properties
    Diamond and Related Materials 125 (2022) 108964(1)-108964(6).
  11. Z. Šobáň, P. Hazdra, A. Laposa, A. Taylor, N. Lambert, V. Povolný, J. Kroutil, Z. Gedeonová, P. Hubík, V. Mortet
    Pseudo-vertical Mo/Au Schottky diodes on {113} oriented boron doped homoepitaxial diamond layers
    Diamond and Related Materials 126 (2022) 109088(1)-109088(6).
  12. M. Baroch, S. Baluchová, A. Taylor, L. Míka, J. Fischer, H. Dejmková, V. Mortet, S. Sedláková, L. Klimša, J. Kopeček, K. Schwarzová-Pecková
    Flow-through working electrode based on free-standing porous boron-doped diamond
    Electrochimica Acta 426 (2022) 140758(1)-140758(8).
  13. A. Uhnáková, A. Machová, M. Janovská, M. Ševčík, J. Štefan, P. Hora, J. Čapek, P. Lejček
    Fracture toughness of Fe–Si single crystals in mode I: Effect of loading rate on an edge crack (–110)[110] at macroscopic and atomistic level
    Journal of Applied Physics 132 (2022) 065107 (1)-065107 (13).
  14. M. Černý, P. Šesták, M. Všianská, P. Lejček
    On Agreement of Experimental Data and Calculated Results in Grain Boundary Segregation
    Metals 12 (2022) 1389 (1)-1389 (12).
  15. P. Ashcheulov, O. Hák, S. Sedláková, A. Taylor, S. Baluchová, K. Schwarzová-Pecková, M. Davydova, J. Kopeček, L. Klimša, M. Vondráček, J. Honolka, V. Mortet
    Multifunctional and Mechanically Robust Porous Diamond with Large Electroactive Surfaces via Electrically Conductive and Insulating Templates for 3D Electrode Applications
    Advanced Materials Interfaces 9 (2022) 2200375(1)-2200375(20).
  16. S. M. Samal, Olga Kosjakova, D. Vokoun, I. Stachiv
    Shape Memory Behaviour of PMMA-Coated NiTi Alloy under Thermal Cycle
    Polymers 14 (2022) 2932-.
  17. X. Bian, L. Heller, O. Tyc, L. Kadeřávek, P. Šittner
    In-situ synchrotron x-ray diffraction texture analysis of tensile deformation of nanocrystalline superelastic NiTi wire at various temperatures
    Materials Science and Engineering A 853 (2022) 143725(1)-143725(21).
  18. Q. He, G. Yin, D. Vokoun, Q. Shen, J. Lu, X. Liu, X. Xu, M. Yu, Z. Dai
    Review on Improvement, Modeling, and Application of Ionic Polymer Metal Composite Artificial Muscle
    Journal of Bionic Engineering 19 (2022) 279-298.
  19. D. Vokoun, S. M. Samal, I. Stachiv
    Magnetic Force Microscopy in Physics and Biomedical Applications
    Magnetochemistry 8 (2022) 42(1)-42(14).
  20. David Nečas, Jiří Kubásek, J. Pinc, Ivo Marek, Črtomir Donik, Irena Paulin, Dalibor Vojtěch
    Ultrafine-Grained Zn–Mg–Sr Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering
    Materials 15 (2022) 8379-.
  21. D. Nečas, I. Marek, J. Pinc, D. Vojtěch, J. Kubásek
    Advanced zinc–Magnesium alloys prepared by mechanical alloying and spark plasma sintering
    Materials 15 (2022) 5272-.
  22. J. Kroutil, A. Laposa, A. Ahmad, J. Voves, V. Povolny, L. Klimša, M. Davydova, M. Husak
    A chemiresistive sensor array based on polyaniline nanocomposites and machine learning classification
    Beilstein Journal of Nanotechnology 13 (2022) 411-423.
  23. M. Roudnická, J. Kubasek, J. Bigas, D. Vojtech
    Stabilizing the microstructure of additively manufactured low-C Co-28Cr-6Mo alloy
    Solid State Phenomena 334 (2022) 13-18.
  24. A. Školáková, J. Pinc, P. Novák
    The preferential formation of Ni2Al3, Fe2Al5, and Ti2Al5 phases in aluminide systems
    Materials Chemistry and Physics 280 (2022) 125859(1)-125859(5).
  25. J. Pinc, J. Kubásek, J. Drahokoupil, J. Čapek, D. Vojtěch, A. Školáková
    Microstructural and Mechanical Characterization of Newly Developed Zn-Mg-CaO Composite
    Materials 15 (2022) 8703-.
  26. P. Salvetr, A. Školáková, D. Melzer, M. Brázda, J. Duchoň, J. Drahokoupil, P. Svora, Š. Msallamová, P. Novák
    Characterization of super duplex stainless steel SAF2507 deposited by directed energy deposition
    Materials Science and Engineering A 857 (2022) 144084-.
  27. J. Kubásek, J. Pinc, K. Hosová, M. Straková, O. Molnárová, J. Duchoň, D. Nečas, M. Čavojský, M. Knapek, M. Godec, I. Paulin, D. Vojtěch, J. Čapek
    The evolution of microstructure and mechanical properties of Zn-0.8Mg-0.2Sr alloy prepared by casting and extrusion
    Journal of Alloys and Compounds 906 (2022) 164308(1)-164308(14).
  28. S. M. Samal, J. Kopeček, P. Šittner
    Interfacial Adhesion of Thick NiTi Coating on Substrate Stainless Steel
    Materials 15 (2022) 8598-.
  29. Iva Karafiátová, Zbyněk Pawlas, L. Heller
    Statistical Assessment of Stress Redistribution in Loaded Polycrystals
    Image Analysis & Stereology 41 (2022) 25-39.
  30. F. Khodabakhshi, O. Ekrt, M. Abdi, A.P. Gerlich, M. Mottaghi, R. Ebrahimi, M. Nosko, G. Wilde
    Hydrogen storage behavior of Mg/Ni layered nanostructured composite materials produced by accumulative fold-forging
    International Journal of Hydrogen Energy 47 (2022) 1048-1062.
  31. I. Stachiv, Z. Mahců, O. Ševeček, Y-R Jeng, W-L Li, M. Kotoul, J. Prášek
    Achievable accuracy of resonating nanomechanical systems for mass sensing of larger analytes in GDa range
    International Journal of Mechanical Sciences 224 (2022) 107353 (1)-107353 (15).
  32. I. Stachiv, Z. Machů, O. Ševeček, O. Tuhovcak, M. Kotoul, Y-R. Jeng
    Resolving measurement of large (~ GDa) chemical/biomolecule complexes with multimode nanomechanical resonators
    Sensors and Actuators B: Chemical 335 (2022) 131062 (1)-131062 (9).
  33. Chih-Yun Kuo, I. Stachiv
    Biological mechanisms and possible primary prevention of depression
    World Journal of Psychiatry 12 (2022) 770-772.
  34. S. M. Samal, I. Blanco, G. Crescente, M. Catauro
    A Simple Model of Heat Distribution at Various Rayleigh Number in Silicon Elastomer
    Macromolecular Symposia 395 (2021) 2000230 (1)-2000230 (4).
  35. S. M. Samal
    Utilization of Red Mud as a Source for Metal Ions—A Review
    Metals 14 (2021) 2211 (1)-2211 (22).
  36. S. M. Samal, I. Blanco
    An Application Review of Fiber-Reinforced Geopolymer Composite
    Fibres 9 (2021) 1-21.
  37. Lim Ji-Ho, Kim Seung-Wook, Kim Samjung, Lee Min Lyul, S. M. Samal, Jeong Dae-Yong
    Single Crystal Growth Behavior in High-Density Nano-Sized Aerosol Deposited Films
    Korean Journal of Materials Research 31 (2021) 488-495.
  38. S. M. Samal, Ignazio Blanco
    Investigation of Dispersion, Interfacial Adhesion of Isotropic and Anisotropic Filler in Polymer Composite
    Appl. Sci. 11 (2021) 8561
  39. K. Hosová, J. Pinc, A. Školáková, V. Bartůněk, P. Veřtát, T. Školáková, F. Průša, D. Vojtěch, J. Čapek
    Influence of Ceramic Particles Character on Resulted Properties of Zinc-Hydroxyapatite/Monetite Composites
    Metals 11 (2021) 499
  40. M. Frost, A. Jury, L. Heller, P. Sedlák
    Experimentally validated constitutive model for NiTi-based shape memory alloys featuring intermediate R-phase transformation: A case study of Ni48Ti49Fe3
    Materials & Design 203 (2021) 109593 (1)-109593 (13).
  41. P. Lejček, S. Hofmann
    Entropy-Driven Grain Boundary Segregation: Prediction of the Phenomenon
    Metals 11 (2021) 1331 (1)-1331 (10).
  42. P. Shayanfard, L. Heller, P. Šandera, P. Šittner
    Experimental and numerical investigation of thermomechanical cycling of notched NiTi shape memory ribbon using SMA model accounting for plastic deformation
    Journal of Materials Research and Technology 15 (2021) 1759-1776.
  43. O. Molnárová, O. Tyc, L. Heller, H. Seiner, P. Šittner
    Evolution of martensitic microstructures in nanocrystalline NiTi wires deformed in tension
    Acta Materialia 218 (2021) 117166 (1)-117166 (29).
  44. O. Tyc, O. Molnárová, P. Šittner
    Effect of microstructure on fatigue of superelastic NiTi wires
    International Journal of Fatigue 152 (2021) 106400 (1)-106400 (11).
  45. S. Baluchová, M. Brycht, A. Taylor, V. Mortet, J. Krůšek, I. Dittert, S. Sedláková, L. Klimša, J. Kopeček, K. Schwarzová-Pecková
    Enhancing electroanalytical performance of porous boron-doped diamond electrodes by increasing thickness for dopamine detection
    Analytica Chimica Acta 1182 (2021) 338949-338949.
  46. A. Strakosova, M. Roudnická, O. Ekrt, A. Michalcová, D. Vojtěch
    Hydrogen Embrittlement of the Additively Manufactured High-Strength X3NiCoMoTi 18-9-5 Maraging Steel
    Materials 14 (2021) 5073(1)-5073(9).
  47. Z. Kacenka, M. Roudnická, O. Ekrt, D. Vojtech
    High susceptibility of 3D-printed Ti-6Al-4V alloy to hydrogen trapping and embrittlement
    Materials Letters 301 (2021) 130334(1)-130334(4).
  48. M. Roudnická, J. Bigas, O. Molnárová, D. Palousek, D. Vojtech
    Different response of cast and 3D-printed Co-Cr-Mo alloy to heat treatment: A thorough microstructure characterization
    Metals 11 (2021) 687(1)-687(21).
  49. M. Roudnická, J. Kubasek, L. Pantelejev, O. Molnárová, J. Bigas, J. Drahokoupil, D. Palousek, D. Vojtech
    Heat treatment of laser powder-bed-fused Co-28Cr-6Mo alloy to remove its microstructural instability by massive hcp→fcc transformation
    Additive Manufacturing 47 (2021) 102265(1)-102265(14).
  50. M. Roudnická, O. Molnárová, J. Drahokoupil, J. Kubasek, J. Bigas, V. Sreibr, D. Palousek, D. Vojtech
    Microstructural instability of L-PBF Co28Cr6Mo alloy at elevated temperatures
    Additive Manufacturing 44 (2021) 102025(1)-102025(16).