1. A. Školáková, H. Katayama, P. Lejček, O. Molnárová, S. Tsurekawa, P. Veřtát, J. Duchoň, J. Čech, P. Svora, O. Ekrt, J. Pinc
    Effect of cold rolling strain on the microstructural evolution in equimolar MoNbTaTiZr refractory complex concentrated alloy: Comprehensive characterization
    Materials & Design 261 (2026) 115393(1)-115393(21).
  2. L. Václavek, S. M. Samal, J. Tomáštík, O. Molnárová, P. Šittner
    Multi-cycle nanoindentation, scratch and wear test on super-elastic (SE) and shape memory (SM) NiTi alloy
    Results in Surfaces and Interfaces 23 (2026) 100768 (1)-100768 (10).
  3. A. Strakošová, O. Dmytrychenko, E. Alarcón, D. Vojtěch, I. Bogomol, P. Lejček
    Fatigue Behaviour of the TiAlV Alloy Used in Biomedical Applications: Case Study
    Metals 16, 204 (2026) 1-13.
  4. H. Ma, O. Molnárová, L. Heller, E. Alarcón, P. Šittner, H. Lu, C. Yang
    Effect of post-processing heat treatments on microstructure and mechanical properties of LPBF-fabricated NiTiHf alloy capable of tensile actuation
    Journal of Materials Science & Technology 275 (2026) 126-140.
  5. V. Paidar, A. Strakošová, J. Drahokoupil, M. Lebeda, J. Karásek, P. Lejček
    Spinodal decomposition at the interface between copper and silver
    Philosophical Magazine 106 (2026) 675-685.
  6. P. Lejček, D. Dvorský, O. Molnárová, Filip Průša, S. Habr, Angelina Strakošová
    Gradient Microstructure of Ag–Cu Metastable Metal-Matrix Composite Processed by Complex Extrusion: A Preliminary Study
    Metals 16 (2026) 89-106.
  7. Angelina Strakošová, D. Dvorský, O. Molnárová, Miroslav Kolíbal, J. Duchoň, P. Svora, Filip Průša, P. Lejček
    Microstructural evolution and formation of extended voids in Ag–Cu metal-matrix composite during prolonged annealing
    Journal of Alloys and Compounds 1061 (2026) 187418-187428.
  8. P. Šittner, H. Seiner, P. Sedlák, O. Molnárová, L. Kadeřávek, O. Tyc, E. Iaparova, L. Heller
    Plastic Deformation of B19′ Martensite by Kwinking: Where it Matters in NiTi Technology
    Shape Memory and Superelasticity 12 (2026) 1-49.
  9. Z. Lu, O. Molnárová, Z. Li, S. Hao, P. Šittner, Y. Xiao
    Strengthening Ni-rich NiTi alloys against dislocation slip in martensite by introducing local chemical heterogeneity via low temperature aging
    Acta Materialia 316 (2026) 122443 (1)-122443 (19).
  10. M. Ševčík, J. Zídek, M. Janovská, A. Machová, P. Hora, J. Červ, J. Čapek, P. Lejček
    Surface phenomena and fracture in Fe–(3 wt. %Si) single crystals with edge cracks (001)[110] on macro and atomic level.
    Journal of Applied Physics 140 (2026) 015106-1-015106-28.
  11. S. M. Samal, S. Joshi, S. Björklund, M. Chandra, A. Bhardwaj, J. Kopeček, S. Habr, L. Václavek, J. Tomáštík, O. Tyc, O. Molnárová, P. Šittner
    HVAF spraying of NiTi coatings: Microstructure, phase transformation and shape memory behavior
    Applied Surface Science Advances 36 (2026) 101038 (1)-101038 (15).
  12. M. Straková, J. Divín, J. Kubásek, D. Dvorský, J. Fojt, D. Sobola, F. M. Seabra, M. Balog, O. Molnárová, D. Vojtěch
    Effect of laser treatment on the microstructure and mechanical properties of the surface of Ti-6Al-4V alloy fabricated by powder bed fusion technology
    Progress in Additive Manufacturing 0 (2026) 1-15.
  13. H. Ma, K. Liu, P. Šittner, O. Molnárová, E. Alarcon, H. Lu, W. Cai, L. Heller, Ch. Yang
    Shape Memory and Thermal Actuation Behavior of Laser Powder Bed Fusion‑Fabricated NiTi‑20Hf High‑Temperature Shape Memory Alloys
    Shape Memory and Superelasticity 12 (2026) 72-82.
  14. V. Smola, P. Vlčák, T. Horazdovsky, J. Sepitka, J. Drahokoupil, Z. Tolde, M. Lebeda, A. Školáková, K. Masek
    Effect of argon ion sputter etching on the surface chemistry and surface properties of binary Ti-Nb alloys and commercially pure titanium
    Surfaces and Interfaces 80 (2026) 108317(1)-108317(13).
  15. Angelina Strakošová, D. Dvorský, Filip Průša, O. Molnárová, S. Habr, Jakub Svoboda, Ivona Sedlářová, Dalibor Vojtěch, P. Lejček
    Microstructure and compression behavior of Ag–W metal matrix composite produced from core–shell powder by spark plasma sintering: case study
    The International Journal of Advanced Manufacturing Technology 139 (2025) 1571-1580.
  16. A. Strakosova, O. Molnárová, D. Dvorský, F. Průša, M. Roudnická, A. Školáková, S. Habr, J. Svoboda, I. Sedlářová, P. Lejček
    Corrigendum to “Multiscale study of microstructural features in Ag–Cu metastable metal-matrix composites” [J. Alloy. Compd. 1028 (2025) 180697]
    Journal of Alloys and Compounds 1032 (2025) 181262-181262.
  17. P. Kratochvíl, H. Thürlová, V. Nováček, A. Strakošová, J. Čech, M. Karlík, P. Haušild, J. Čapek, F. Průša
    Understanding the influence of Ti content on mechanically alloyed and sintered CoCrFeNiTix high entropy alloy
    Journal of Materials Research and Technology 35 (2025) 7371-7383.
  18. D. Dvorský, D. Nečas, E. de Prado, J. Duchoň, P. Svora, O. Ekrt, A. Strakošová, J. Kubásek, D. Vojtěch
    Innovative powder pre-treatment strategies for enhancing maraging steel performance
    Materials 18 (2025) 437-.
  19. D. Medová, A. Knaislová, A. Strakosova, O. Molnárová, J. Čapek, I. Voňavková, D. Vojtěch
    Comparison of direct energy deposition and powder bed fusion technology in the preparation of Ti–6Al–4V alloy
    Journal of Materials Research and Technology 35 (2025) 3825-3840.
  20. A. Strakosova, O. Molnárová, D. Dvorský, Filip Průša, M. Roudnická, A. Školáková, S. Habr, J. Svoboda, I. Sedlářová, P. Lejček
    Multiscale study of microstructural features in Ag–Cu metastable metal-matrix composites
    Journal of Alloys and Compounds 1028 (2025) 180697(1)-.
  21. P. Lejček, M. Šob
    Entropy: A controversy between experiment and calculations in grain boundary segregation
    Progress in Materials Science 151 (2025) 101431 (1)-101431 (38).
  22. V. Paidar, A. Strakosova, F. Průša, D. Dvorský, P. Lejček
    Interpretation of plastic deformation of copper particles in silver
    Materials Letters 378 (2025) 137601 (1)-137601 (3).
  23. D. Dvorský, Yoshihito Kawamura, Shin-Ichi Inoue, Jiří Kubásek, David Nečas, L. Heller, Esther De Prado, J. Duchoň, P. Svora, Miroslav Čavojský, Dalibor Vojtěch
    Improving Strength and Ductility in Mg–Y–Zn alloy via Pre-deformation Prior to Extrusion
    Manufacturing Technology 25 (2025) 455-459.
  24. L. Hlodák, J. Liška, J. Čech, K. Trojan, K. Aubrechtová Dragounová, A. Materna, K. Tesař
    Micromechanical and biodegradation properties of a rapidly solidified Mg-1.3Zn alloy with gradient microstructure
    Materials & Design 260 (2025) 115236 (1)-115236 (13).
  25. V. Paidar, A. Strakošová, J. Drahokoupil, M. Lebeda, J. Karásek, P. Lejček
    Spinodal decomposition at the interface between copper and silver
    Philosophical Magazine 106 (2025) 675-685.
  26. L. Kraus, D. Musiienko, M. Kempa, J. Čapek
    Broadband ferromagnetic resonance in Ni-Mn-Ga single crystal
    Journal of Magnetism and Magnetic Materials 629 (2025) 173330(1)-173330(6).
  27. J. Kubásek, S. Torkornoo, D. Nečas, I. McCarroll, V. Hybášek, B. Gault, E. Jablonská, Č. Donik, I. Paulin, P. Gogola, M. Kusý, Z. Míchal, J. Fojt, M. Čavojský, J. Duchoň, M. Jarošová, J. Čapek
    Towards increased strength and retained ductility of Zn–Mg-(Ag) materials for medical devices by adopting powder metallurgy processing routes
    Journal of Materials Research and Technology 37 (2025) 4345-4361.
  28. O. Molnárová, E. Iaparova, L. Heller, P. Šittner
    TEM analysis of permanent lattice defects created by forward and reverse martensitic transformations proceeding under stress in nanocrystalline NiTi wire
    Acta Materialia 297 (2025) 121346 (1)-121346 (33).
  29. D. Dvorský, Yoshihito Kawamura, Shin-Ichi Inoue, Soya Nishimoto, Jiří Kubásek, Anna Boukalová, Miroslav Čavojský, L. Heller, J. Duchoň, Dalibor Vojtěch
    Exploring Kink Strengthening in WZ21 Magnesium Alloy via Slow Solidification and Extrusion
    Journal of Magnesium and Alloys 13 (2025) 2155-2173.
  30. J. Pokorný, J. Kubásek, Č. Donik, D. Nečas, V. Hybášek, J. Fojt, A. Dobkowska, I. Paulin, J. Čapek, M. Godec
    Enhanced Performance of Austenitic Oxide Dispersion-Strengthened 316L Steel: A Study on Y2O3 Reinforcement and Corrosion Behaviour
    Materials 18 (2025) 641(1)-641(15).
  31. H. Ma, O. Molnárová, P. Šittner, H. LU, W. Cai, E. Alarcón, J. Kopeček, L. Heller, L. Kang, C. Yang
    NiTiHf high-temperature shape memory alloy fabricated via laser powder bed fusion showing fully recoverable actuation under tensile stress
    Acta Materialia 301 (2025) 121562 (1)-121562 (40).
  32. P. Šittner, L. Heller, E. Iaparova, L. Kadeřávek, O. Molnárová, O. Tyc
    Generation of Plastic Strains by the Martensitic Transformations under Stress via Dislocation Slip in Martensite as the Origin of Functional Fatigue
    Shap. Mem. Superelasticity 0 (2025) 1 - 29
  33. Angelina Strakošová, Daniel Kvapil, Filip Průša, M. Vronka, P. Svora, P. Lejček, Dalibor Vojtěch
    Microstructural and mechanical insights into 1.2709 maraging steel produced by direct energy deposition
    Journal of Materials Science 60 (2025) 17933-17952.
  34. T. Školáková, A. Kutějová, A. Školáková, P. Zámostný
    The hidden impact of wet and dry milling processes on pharmaceutical surfaces
    International Journal of Pharmaceutics 681 (2025) 125870(1)-125870(12) .
  35. J. Pinc, P. Vlčák, M. Lebeda, J. Fojt, V. Bartůněk, V. Smola, M. Vronka, J. Drahokoupil, Z. Weiss, P. Svora, H. Lesáková, K.Šindelářová, O. Molnárová, T. Horažďovský, T. Studecký, P. Salvetr, J. Kubásek, J. Čapek, A. Školáková
    The influence of nitrogen ion implantation on the microstructure and chemical composition of a thin layer on the biodegradable Zn-0.8Mg-0.2Sr substrate
    Surfaces and Interfaces 65 (2025) 106544(1)-106544(13).
  36. P. Salvetr, A. Školáková, D. Melzer, J. Drahokoupil, J. Pinc, P. Novák, D. Nečas
    Optimization of spark plasma sintering temperature: Influence on microstructure and mechanical properties of SAF 2507 duplex stainless steel
    Materials Chemistry and Physics 333 (2025) 130298 (1)-130298 (14).
  37. A. Školáková, J. Pinc, R. Kubík, K. Hosová, J. Fojt, E. Jablonská, P. Slepička, K. Tesař, J. Drahokoupil, V. Hybášek, J. Čech, J.Blažek, E. Kučerová, D. Sobola, M. Straková, D. Vojtěch
    The effect of pulsed laser on the surface state of 3D-printed triply periodic structures in TiAl6V4 alloy
    Progress in Additive Manufacturing - (2025) 1-21.
  38. Y. Tian, Y. Xu, J. Pinc, J. Fojt, V. Hybášek, J. Kubásek, Š. Msallamová, Y. Xiang, M. Guo, J. Čapek, P. LI, T. Hu
    Biodegradable Zn-0.8Mg-0.2Sr alloy as an internal fixation material exhibits controlled degradation with enhanced osteogenesis
    RSC Advances 37 (2025) 30071-30088.
  39. K. Caldová, A. Školáková, J. Pinc, D. Vojtěch
    Characterization of Microstructure and Defects in the Ti-6Al-4V Alloy Produced by 3D Printing SLM Technology
    Manufacturing Technology 25 (2025) 735-741.
  40. M. Balog, P. Krížik, A. Školáková, P. Švec, J. Kubásek, J. Pinc, M. M. de Castro, R. Figueiredo
    Hall-Petch strengthening in ultrafine-grained Zn with stabilized boundaries
    Journal of Materials Research and Technology 33 (2024) 7458-7468.
  41. O. Tyc, E. Iaparova, O. Molnárová, L. Heller, P. Šittner
    Stress-induced martensitic transformation in NiTi at elevated temperatures: Martensite variant microstructures, recoverable strains and plastic strains
    Acta Materialia 279 (2024) 120287 (1)-120287 (20).
  42. O. Molnárová, E. A. Tarquino, A. Školáková, S. Habr, O. Ekrt, M. Čepová, P. Málek, P. Lejček
    Effect of CSET processing on a commercial purity polycrystalline Al sample and numerical simulation of induced plastic deformation
    Journal of Manufacturing Processes 126 (2024) 208-219.
  43. A. Školáková, J. Pinc, E. Jablonská, T. Školáková, P. Veřtát, B. Janebová, A. Kutová, J. Čapek, K. Hosová, D. Vojtěch, J. Kubásek
    A zinc phosphate layered biodegradable Zn-0.8Mg-0.2Sr alloy: Characterization and mechanism of hopeite formation
    Surface & Coatings Technology 487 (2024) 130986 (1)-130986 (21).
  44. K. Ulybkina, K. Kamyshnykova, A. Klimová, T. Pelachová, A. Školáková, J. Pinc
    Thermal stability and grain growth kinetics in rotary swaged Al0.35CoCrFeNi complex concentrated alloy
    Intermetallics 175 (2024) 108456(1)-108456(10).
  45. P. Lejček, A. Školáková, O. Molnárová, S. Habr, J. Čapek, M. Čepová, P. Málek
    Development of Microstructure in Aluminum Single Crystal During Complex Shearing of Extruded Tube
    Metallurgical and Materials Transactions A 55 (2024) 3407-3421.
  46. P. Kratochvíl, F. Průša, H. Thürlová, A. Strakošová, M. Karlík, J. Čech, P. Haušild, J. Čapek, O. Ekrt, M. Jarošová, M. Vronka, J. Veselý, P. Minárik, O. Jankovský & M. Cabibbo
    The role of the preparation route on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy
    Journal of Materials Research and Technology 30 (2024) 4248-4260.
  47. M. Roudnická, Z. Kačenka, D. Dvorský, J. Drahokoupil, D. Vojtěch
    Hydrogen Embrittlement of Ti-Al6-V4 Alloy Manufactured by Laser Powder Bed Fusion Induced by Electrochemical Charging
    Metals 14 (2024) 251-.
  48. O. Molnárová, O. Tyc, M. Klinger, P. Šittner
    Reconstruction of martensite variant microstructures in grains of deformed NiTi shape memory alloy by TEM
    Materials Characterization 214 (2024) 114084 (1)-114084 (14).
  49. P. Šittner, E. Iaparova, O. Molnárová, O. Tyc, X. Bian, L. Kadeřávek, L. Heller
    Recoverable and plastic strains generated by forward and reverse martensitic transformations under external stress in NiTi SMA wires
    Materials & Design 244 (2024) 113188 (1)-113188 (19).
  50. A. Strakosova, M. Roudnická, J. Šafka, M. Ackermann, D. Dvorský, A. Školáková, M. Vronka, P. Svora, J. Drahokoupil, J. Pinc, J. Maňák, O. Ekrt, Z. Weiss, V. Mazáčová, P. Lejček
    Effect of titanium on microstructure and mechanical behaviour of additively manufactured 1.2709 maraging steel
    Additive Manufacturing 88 (2024) 104264(1)-104277(13).