1. P. Opěla, J. Walek, J. Kopeček
    Machine Learning Techniques in Predicting Hot Deformation Behavior of Metallic Materials
    Computer Modeling in Engineering & Sciences 142 (2025) 713-732.
  2. S. M. Samal, J. Tomáštík, L. Václavek, M. Chandra, J. Kopeček, I. Stachiv, P. Šittner
    Recovery of deformation surface of superelastic and shape memory NiTi alloy
    Applied Surface Science 25 (2025) 100684-1-100684-20.
  3. M. Alam, P. Hubík, Z. Gedeonová, L. Fekete, J. Kopeček, V. Mortet
    Optical and electrical properties of low-high boron-doped {115}-oriented epitaxial diamond layers
    Diamond and Related Materials 152 (2025) 111871-1-111871-7.
  4. J. Navrátil, O. Caha, J. Kopeček, P. Čermák, J. Prokleška, V. Holý, V. Sechovský, L. Beneš, K. Carva, J. Honolka, Č. Drašar
    Electronic properties of Fe impurities in SnS van der Waals crystals – Revealing high-mobility holes
    Materials Science and Engineering B 301 (2024) 117148(1)-117148(10).
  5. D. Musiienko, J. Kopeček, R. H. Colman, K. Ullakko, O. Heczko
    Increase of twinning stress in single crystalline Ni-Mn-Ga micropillars
    Materialia 33 (2024) 101988-1-101988-5.
  6. M. Alam, P. Hubík, Z. Gedeonová, L. Fekete, J. Kopeček, A. Taylor, V. Mortet
    Thick crack-free {113} epitaxial boron-doped diamond layers for power electronics—Deposition with nitrogen addition and high microwave power
    Applied Physics Letters 124 (2024) 161904(1)-161904(8).
  7. V. Dřínek, P. Dytrych, R. Fajgar, M. Klementová, J. Kupčík, J. Kopeček, P. Svora, M. Koštejn, V. Jandová, K. Soukup, R. Beránek
    A robust and high performance copper silicide catalyst for electrochemical CO.2. reduction
    Materials Advances 5 (2024) 2917-2925.
  8. Ondřej Stránský, Libor Beránek, Sunil Pathak, Jan Šmaus, J. Kopeček, Jan Kaufman, Marek Böhmb, Jan Brajer, Tomáš Mocek, František Holešovsky
    Effects of sacrificial coating material in laser shock peening of L-PBF printed AlSi10Mg
    Virtual and Physical Prototyping 19 (2024) e2340656(1)-e2340656(15).
  9. Z. Weiss, J. Čapek, Z. Kačenka, O. Ekrt, J. Kopeček, M. Losertová, D. Vojtěch
    Analysis of hydrogen in a hydrogenated, 3D-printed Ti–6Al–4V alloy by glow discharge optical emission spectroscopy: sample heating effects
    Journal of Analytical Atomic Spectrometry 39 (2024) 996-1003.
  10. A. Shamardin, S. Cichoň, M. Rameš, E. de Prado, L. Lebedová Volfová, L. Fekete, J. Kopeček, P. Kos, L. Nowak, J. Heicl, J. Zázvorka, J. Hamrle, M. Veis, O. Heczko, J. Lančok
    Growth and Properties of Full Heusler Co2TiSn Epitaxial Thin Films
    Journal of Alloys and Compounds 1002 (2024) 175296-.
  11. S. M. Samal, J. Zeman, S. Habr, O. pacherová, J. Kopeček, P. Šittner
    Preparation and Characterization of Multilayer NiTi Coatings by a Thermal Plasma Process
    Materials 17 (2024) 1-17.
  12. S. M. Samal, J. Zeman, J. Kopeček, P. Šittner
    Thermal plasma spraying of NiTi powder for thick coating of shape memory alloy
    Journal of Alloys and Compounds 984 (2024) 173962 (1)- 173962 (15).
  13. S. Baluchová, K. Sung, Z. Weiss, J. Kopeček, L. Fekete, J. Buijnsters, V. Mortet
    Unveiling the microstructure and promising electrochemical performance of heavily phosphorus-doped diamond electrodes
    Electrochimica Acta 499 (2024) 144696 (1)-144696 (11).
  14. R. Kocich, J. Kopeček, M. Marek
    Correlation of structure development and electric characteristics within high pressure torsion processed copper
    Materialwissenschaft und Werkstofftechnik 55 (2024) 579-587.
  15. S. Pathak, O. Stránský, J. Šmaus, J. Kopeček, J. Arackal Narayanan, J. Kaufman, L. Beránek, M. Böhm, J. Brajer, T. Mocek
    Influence on micro-geometry and surface characteristics of laser powder bed fusion built 17-4 PH miniature spur gears in laser shock peening
    Advances in Industrial and Manufacturing Engineering 9 (2024) 100151-1-100151-12.
  16. K. L. Rao, A. Bhardwaj, Ch. Sh. Sai Satwika, J. Kopeček, G.M. Karthik, A. K. Gupta
    Influence of constrained groove pressing and post-annealing on the mechanical, microstructural, and strain hardening behaviour of Nimonic 263 alloy
    Materials Science and Engineering A 922 (2024) 147658-1-147658-15.
  17. R. Dejarnac, J. Matějíček, H. Greuner, B. Böswirth, J. Gerardin, J. Kopeček, D. Kirhetov
    Qualification by HHF tests of W coatings on Inconel superalloy for COMPASS-U plasma-facing components
    Nuclear Materials and Energy 42 (2024) 101841-1-101841-15.
  18. I. Kratochvílová, L. Celbová, P. Ashcheulov, J. Kopeček, L. Klimša, E. de Prado, K. Aubrechtová Dragounová, J. Luštinec, J. Macák, P. Sajdl, R. Škoda, J. Bulíř
    Polycrystalline Diamond and Magnetron Sputtered Chromium as a Double Coating for Accident-Tolerant Nuclear Fuel Tubes
    Journal of Nuclear Materials 578 (2023) 154333(1)-154333(13).
  19. S. Pathak, M. Böhm, J. Kaufman, J. Kopeček, S. Zulić, O. Stránský, J. Brajer, L. Beránek, T. Mocek
    Microstructure and surface quality of SLM printed miniature helical gear in LSPwC
    Surface Engineering 20 (2023) 1-9.
  20. M. Zelenský, J. Fischer, S. Baluchová, L. Klimša, J. Kopeček, M. Vondráček, L. Fekete, J. Eidenschink, F.M. Matysik, S. Mandal, O.A. Williams, M. Hromadová, V. Mortet, K. Schwarzová-Pecková, A. Taylor
    Chem-mechanical polishing influenced morphology, spectral and electrochemical characteristics of boron doped diamond
    Carbon 203 (2023) 363-376.
  21. P. Novák, D. Benediktová, S. Mestek, A. Tsepeleva, J. Kopeček
    Aluminium alloys with natural ratio of alloying elements manufactured by powder metalurgy
    Journal of Alloys and Compounds 931 (2023) 167440-1-167440-10.
  22. E Alarcon, L. Heller, E. de Prado, J. Kopeček
    Temperature and microstructure dependent tensile behavior of coarse grained superelastic NiTi
    Materials & Design 226 (2023) 111617-.
  23. O. Stránský, L. Beránek, S. Pathak, J. Kaufman, M. Böhm, J. Kopeček, F. Holešovský, Š. Petrášek, L. Hlavůňková, Z. Soukup
    Porosity and Microstructure of L-PBF printed AlSi10Mg thin tubes in Laser Shock Peening
    Journal of Materials Research and Technology 27 (2023) 1683-1695.
  24. S. M. Samal, J. Zeman, S. Habr, O. Pacherová, M. Chandra, J. Kopeček, P. Šittner
    Evaluation of Microstructure–Porosity–Hardness of Thermal Plasma-Sprayed NiTi Coating Layers
    Journal of Manufacturing Processes 7 (2023) 198-1-198-16.
  25. S. Samothrakitis, C. B. Larsen, A. Kaestner, E. Polatidis, J. Čapek, J. Hovind, A. Fazan, J. Allibon, M. Busi, S. Schmidt, J. Kopeček, M. Strobl
    The FALCON double-detector Laue diffractometer add-on for grain mapping at POLDI
    Journal of Applied Crystallography 56 (2023) 1792-1801.
  26. D. Yesilpinar, M. Vondráček, P. Čermák, H. Mönig, J. Kopeček, O. Caha, K. Carva, Č. Drašar, J. Honolka
    Defect pairing in Fe-doped SnS van der Waals crystals: a photoemission and scanning tunneling microscopy study
    Nanoscale 15 (2023) 13110-13119.
  27. J. Radhakrishnan, M. Diaz, F. Cordovilla, J. Kopeček, José L. Ocaña
    Water droplets impact dynamics on laser engineered superhydrophobic ceramic surface
    Optics and Laser Technology 158 (2023) 108887-1-108887-10.
  28. S. Pathak, M. Böhm, J. Kaufman, J. Kopeček, S. Zulić, O. Stránský, A. Shukla, J. Brajer, L. Beránek, J. Radhakrisnan, D. Rostohar, T. Mocek
    Surface integrity of SLM manufactured meso-size gears in laser shock peening without coating
    Journal of Manufacturing Processes 85 (2023) 764-773.
  29. L. Kalvoda, J. Jakoubková, M. Burda, P. Kwiecien, I. Richter, J. Kopeček
    Fiber Optic Sensor of Ammonia Gas Using Plasmonic Extraordinary Optical Transmission
    Sensors 23 (2023) 4064 – 1-4064 – 10.
  30. S. M. Samal, M. Sulovský, J. Kopeček, P. Šittner
    Deposition and characterization of plasma sprayed NiTi powder on stainless steel and graphite substrate
    Materials Chemistry and Physics 307 (2023) 128146-1-128146-11.
  31. S. M. Samal, J. Zeman, J. Kopeček, P. Šittner
    Phase Transformation and Mechanical Properties of a NiTi Coating Applied to Graphite Substrate via a Plasma Spraying Process
    Coatings 13 (2023) 1174-1-1174-14.
  32. J. Kopeček, L. Bajtošová, P. Veřtát, D. Šimek
    (Sub)structure Development in Gradually Swaged Electroconductive Bars
    Materials 16 (2023) 5324-1-5324-12.
  33. K. Hlushko, T. Ziegelwanger, M. Reisinger, J. Todt, M. Meindlhumer, S. Beuer, M. Rommel, I. Greving, S. Flenner, J. Kopeček, J. Keckes, C. Detlefs, C. Yildirim
    Intragranular thermal fatigue of Cu thin films: Near-grain boundary hardening, strain localization and voiding
    Acta Materialia 253 (2023) 118961-1-118961-10.
  34. A. Taylor, P. Ashcheulov, P. Hubík, Z. Weiss, L. Klimša, J. Kopeček, J. Hrabovský, M. Veis, J. Lorinčík, I. Elantyev, V. Mortet
    Comparative determination of atomic boron and carrier concentration in highly boron doped nano-crystalline diamond
    Diamond and Related Materials 135 (2023) 109837(1)-109837(8).
  35. Sanin Zulić, Danijela Rostohar, Jan Kaufman, Sunil Pathak, J. Kopeček, Marek Böhm, Jan Brajer, Tomáš Mocek
    Fatigue life enhancement of additive manufactured 316l stainless steel by LSP using a DPSS laser system
    Surface Engineering 1080 (2022) 1-8.
  36. V. Mortet, A. Taylor, M. Davydova, J.Jiránek, L. Fekete, L. Klimša, D. Šimek, N. Lambert, S. Sedláková, J. Kopeček, P.Hazdra
    Effect of substrate crystalline orientation on boron-doped homoepitaxial diamond growth
    Diamond and Related Materials 122 (2022) 108887(1)-108887(6).
  37. A. Taylor, S. Baluchová, L. Fekete, L. Klimša, J. Kopeček, D. Šimek, M. Vondráček, L. Míka, J. Fischer, K. Schwarzová-Pecková, V. Mortet
    Growth and comparison of high-quality MW PECVD grown B doped diamond layers on {118}, {115} and {113} single crystal diamond substrates
    Diamond and Related Materials 123 (2022) 108815(1)-108815(8).
  38. S. Pathak, S. Zulic, J. Kaufman, J. Kopeček, O. Stránský, M. Böhm, J. Brajer, L. Beránek, A. Shukla, M. Ackermann, F. Véle, T. Mocek
    Post-processing of selective laser melting manufactured SS-304L by laser shock peening
    Journal of Materials Research and Technology 19 (2022) 4787-4792.
  39. P. Ashcheulov, O. Hák, S. Sedláková, A. Taylor, S. Baluchová, K. Schwarzová-Pecková, M. Davydova, J. Kopeček, L. Klimša, M. Vondráček, J. Honolka, V. Mortet
    Multifunctional and Mechanically Robust Porous Diamond with Large Electroactive Surfaces via Electrically Conductive and Insulating Templates for 3D Electrode Applications
    Advanced Materials Interfaces 9 (2022) 2200375(1)-2200375(20).
  40. M. V. Makarova, A. Prokhorov, A. Stupakov, J. Kopeček, J. Drahokoupil, V. Trepakov, A. Dejneka
    Synthesis and Magnetic Properties of Carbon Doped and Reduced SrTiO3 Nanoparticles
    Crystals 12 (2022) 1275(1)-1275(13).
  41. D. Košovský, M. Miglierini, M. Pavúk, K. Sedlačková, J. Kopeček
    Mössbauer spectrometry of model binary Fe100-xCrx (1 ≤ × ≤ 50) alloy
    physica status solidi (b) 259 (2022) 2100632(1)-2100632(6).
  42. S. M. Samal, J. Kopeček, P. Šittner
    Interfacial Adhesion of Thick NiTi Coating on Substrate Stainless Steel
    Materials 15 (2022) 8598-.
  43. M. Baroch, S. Baluchová, A. Taylor, L. Míka, J. Fischer, H. Dejmková, V. Mortet, S. Sedláková, L. Klimša, J. Kopeček, K. Schwarzová-Pecková
    Flow-through working electrode based on free-standing porous boron-doped diamond
    Electrochimica Acta 426 (2022) 140758(1)-140758(8).
  44. N. Lambert, Z. Weiss, L. Klimša, J. Kopeček, Z. Gedeonová, P. Hubík, V. Mortet
    Highly phosphorus-doped polycrystalline diamond growth and properties
    Diamond and Related Materials 125 (2022) 108964(1)-108964(6).
  45. R. Jagdheesh, J. Kopeček, J. Brajer. T. Mocek
    Superhydrophobic microspiked surface structures by ultrashort laser patterning
    Surface Engineering 38 (2021) 1-12.
  46. V. Mortet, A. Taylor, N. Lambert, Z. Gedeonová, L. Fekete, J. Lorinčik, L. Klimša, J. Kopeček, P. Hubík, Z. Šobáň, A. Laposa, M. Davydova, J. Voves, A. Pošta, V. Povolný, P. Hazdra
    Properties of boron-doped (113) oriented homoepitaxial diamond layers
    Diamond and Related Materials 111 (2021) 108223(1)-108223(6).
  47. S. M. Samal, O. Molnárová, F. Průša, J. Kopeček, L. Heller, P. Šittner, M. Škodová, L. Abate, I. Blanco
    Net-Shape NiTi Shape Memory Alloy by Spark Plasma Sintering Method
    Applied Sciences 11 (2021) 1802(1)-1802(16).
  48. L. Kraus, J. Kopeček
    Investigation of Cu/NiFe composite wires by SAMR method
    Journal of Magnetism and Magnetic Materials 533 (2021) 168010(1)-168010(7).
  49. S. M. Samal, J. Cibulková, R. Čtvrtlík, J. Tomáštík, L. Václavek, J. Kopeček, P. Šittner
    Tribological Behavior of NiTi Alloy Produced by Spark Plasma Sintering Method
    Coatings 11 (2021) 1246(1)-1246(18).
  50. M. Brycht, S. Baluchová, A. Taylor, V. Mortet, S. Sedláková, L. Klimša, J. Kopeček, K. Schwarzová-Pecková
    Comparison of electrochemical performance of various boron-doped diamond electrodes: Dopamine sensing in biomimicking media used for cell cultivation
    Bioelectrochemistry 137 (2021) 107646 (1)-107646 (12).